Gravity Wall - GEO5
This program is used for design of gravity retaining walls. It offers a range of wall shapes and verifies mass concrete cross-sections.
- Verification analysis can be performed employing EN 1997-1, LRFD or classical approach (limit states, factor of safety)
- EN 1997 – option to choose partial factors based on National Annexes
- EN 1997 – option to choose all design approaches, consider design situations
- Analysis of internal stability (overturning, slip, bearing capacity of foundation soil)
- Check of concrete cross-sections according to various standards (EC 2, BS 8110, IS456, CSN, PN)
- Verification of stone masonry structures (EC 6, GB 50030-2011)
- Generally layered soil environment
- Built-in database of soil parameters
- Arbitrary number of surcharges applied to structures (strip, trapezoidal, concentrated load)
- Arbitrary number of inserted forces (anchors, safety fences, etc.)
- Modelling of water present in front and behind structures, modelling of artesian water
- Possibility to consider general shape of gravity wall
- General shape of terrain behind the structure
- Front face resistance in front of the structure (at rest, passive, reduced passive)
- New types of foundation below the gravity wall (strip footing, piles)
- Berms in front of the structure
- Analysis of earth pressures in effective and total parameters
- Earthquake effects (Mononobe-Okabe, Arrango, Chinese standards)
- Multiple construction stages
- Tensile strength of concrete may be ignored
Explanation of Product Terms
Hardware Key (Hardlock/HW Key): Hardlock is a piece of hardware (i.e. USB or dongle) used to eliminate software piracy. Therefore, the software only runs on a computer with connected hardlock. Licenses locked to hardware key are not limited to one computer, but to any computer with connected hardlock. For example, it allows the users to run programs on an office computer or on a notebook out of the office. For larger companies we offer Network hardlocks, which are attached to one computer on a network allowing product usage on other computers connected to the same network.
Software Key (SW Key): Software key is a unique code (Token) that is installed on a user’s computer, which works in a similar way like a hardlock. This key is bound to the hardware of a given computer. The first installation on the client’s computer is done using the software key Token. The software key is bound to the hardware parameters of a given computer on which the key is installed. If these parameters are changed the software cannot be launched until the issue is resolved by reporting the Hardware Changes (to restore the full functionality).
Token: Token is a onetime use unique code to install the software key on the client’s computer. For example, “1234_5_ABCDEFGHXYZABCLO” (1234 is user number, 5 is key sequence number)
Local Licence (Software Key): If you buy a local licence with a software key, the software can be installed and used on one computer only. If you buy a new computer, the key can be transferred (only if you have the commercial version of software). The software key is sent by email within working hours. Individual programs can be installed using one or more local keys according to individual user needs.
Local Licence (Hardware Key): If you buy a local licence with a hardlock, you can install the programs on an arbitrary number of computers, however the programs will only work on the computer to which the hardlock is connected. Individual programs can be installed using one or more local keys according to individual user needs.
Network Licence (Hardware Key): Our network licences are only distributed with a hardlock. If you buy a network licence, you may use the software on more computers in the network. The maximum number of users that can work with the software at once is given by the number of purchased licences (i.e Max. 10 users or Max. 50 users). In order to run the application, the appropriate network hardlock has to be connected to a computer in the network.
Software Maintenance: Fine Maintenance subscribers get all updates and upgrades (new Editions) for free. Software Maintenance is available as an annual subscription for the amount of 15% of the software program and can be purchased in conjunction with your Local or Network licence. Please contact ETIA if you already have a Local/Network licence and would like to purchase maintenance separately.